1 / 2
MK3S+ Cold-End Blower Fan for Mosquito Extruder — image 1
1 / 2

MK3S+ Cold-End Blower Fan for Mosquito Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mod replaces the cold-cnd fan with a mounting block for a blower fan. Designed for MK3S+ with Mosquito

Rating
0 / 5
Likes
11
Downloads
24
Makes
0
Views
763
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This model is for a mounting block for a blower fan to replace the cold end fan on a Prusa MK3S+ with a Mosquito extruder.

The existing fan is replaced with the mounting block, and a blower fan identical to the part cooling fan is installed.

I have found this to vastly improve temp stability when printing high-temp filaments in cabinets. 

I found that on some long prints with ASA or PC, that I would get heat creep issues in the cabinet. With this fan, that has never recurred.

You will need to remove the old fan and connect the new fan to the same wire. I cut the wire and installed a 3 pin mini molex connector.

Tags