1 / 14
The Mini Satsana for Ender 2 Pro W/ Bltouch/Cr-Touch Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Features: - Active part cooling on both sides of the hotend - Mount for bed leveling sensor
- Rating
- 4.4 / 5
- Likes
- 33
- Downloads
- 272
- Makes
- 6
- Views
- 1,802
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model is a remix. I originally came across this model from Printibles user 3dprint, then I found the original model on Thingiverse that had the .step files and I ended up editing the model in Fusion360 to fit the Ender 2 Pro and a Cr-touch/Bltouch.
Features
- Active part cooling on both sides of the hotend
- Inner mouth rim thingy for 4010 Blower Fan, designed to help prevent air from escaping
- Bed leveling sensor mount(Optional)
Print Settings
- .2mm layer height
- Infill 35%+
- Supports needed
- Brim (optional)
- Material: ABS or PETG
Assembly Hardware
- 4 x M3x8mm (+2 if using a bed leveling sensor)
- 4 x M3x12mm for 40mm fan
- 2 x M2x8mm for 4010 blower fan(can use original smaller screws from 4010)
XY Probe Offset
These offsets are rounded directly from the values on Fusion360 exact values are in the images above
CR-Touch
- X-Offset = -47mm
- Y-Offset = -17.6mm
BLTouch
- X-Offset = -47.8mm
- Y-Offset = -17.6mm
Updates:
- Fixed CR-Mount from being too low (3/19/23)