1 / 9
wooden rack | connecting pieces
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
some connecting pieces to build a rack out of wood. Can be changed to any size.
- Rating
- 0 / 5
- Likes
- 85
- Downloads
- 135
- Makes
- 0
- Views
- 1,071
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General Information
I drew the model in Autodesk Inventor. I can confirm that it holds at least 80kg.
I made the connectors for:
- wooden sticks with a 19mm diameter
- wooden board with 20mm thickness
But you can change the dimension as you like.
Assembly
Material for assembly
- Screws
- Drill
- Wooden sticks
- Wooden board
How to assemble
- Cut the wooden stick to the correct length
- Prepare the wooden board to your liking. I sanded the wood and applied a oil.
- Drill a hole through the 3D printed part and the wood to screw in the screws later.
Print settings
Material
I used PLA but it depends on how and where you want to use the rack. If the rack will be exposed to higher heat, consider using PETG or other higher temperature materials like ABS, ASA, etc.
Slicer Settings
- 3 perimeters
- 25% infill
- no supports
- raft or brim (if you have adhesion problems)
Positioning
