Xiaomi Mi Air Purifier 2S replacement fans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement or spare fans for the Xiaomi Mi Air Purifier 2S
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 97
- Makes
- 0
- Views
- 1,571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Problem
Turns out that tilting your Xiaomi Mi Air Purifier 2S while running is a bad idea, as it broke a few fan blades.
The purifier has 2 fans, mounted concentrically on the same motor. Spares are ~26 EUR each on Aliexpress, plus shipping … doesn't make much sense, whole machine was ~100 EUR new. So, let's print replacements !
Print settings
You want this in PETG or ABS, sturdy and printed as symmetrical as possible.
- 4-5 perimeters
- 20-40% infill (choose one of the symmetric ones, like triangles)
- scattered seam (you don't want any imbalance)
- place both fans mounting side up
- no supports 😎
Additional notes
The motor shaft is 8 mm. My design has the fan hole at 8.1 mm, which should be a tight fit - you don't want it too tight or too loose, just enough play as the pins will hold the blade in place just fine. Depending on your material/printer/settings/etc, you might need to run an 8 mm drill bit through the fan blades in order to get it installed.
When mounting, be sure to align the indents with the two pins mounted on the motor shaft. Ensure there's clearance between the motor body/mount and the blades, nothing should rub. Pay attention, the upper nut and lower cone are reverse threaded.
Disassembly instructions
Watch these to understand how to disassemble the purifier: