Prusa i3 MK3S+ LCD Plate for Lack enclosure / Montageplatte für LCD Bildschirm Prusa i3 MK3S+ Gehäuse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plate to remove the LCS Panel from the inside of your Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 1
- Views
- 423
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it.
You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer.
The wood srews I used were 3,5x20 but 3mm or different legths would work as well.
Nach dem Bau des Lack Gehäuses für meinen MK3 wollte ich den LCD Bildschirm außerhalb des Gehäuses unterbringen. Dafür habe ich diese Montageplatte konstruiert. Ich habe M3x18 Schrauben zum Anbringen des Bildschirms verwendet, die bei den Ersatzteilen des Druckers dabei waren.
Um die Platte am Tisch zu befestigen habe ich 3,5x20 Holzschrauben verwendet.