1 / 4
Drawer Handle Router Template — image 1
1 / 4

Drawer Handle Router Template

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple router template for routing draw handles in the top of drawer fronts.

Rating
5 / 5
Likes
174
Downloads
774
Makes
1
Views
3,532
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

A router template I made for routing simple draw handles in tool drawer fronts in my workshop.

Clamp it to your drawer front with thin double-sided tape or using the masking tape/CA Glue technique, then use an edge/trim straight bit in the router table or plunge/trim router, making sure the guide bearing runs along the edge of the template without cutting it.

I generally finish the handle off with a round-over bit to remove sharp edges, but sanding will work fine too.

There is a small window in the middle so you can line-up the template to a line on the drawer front to make sure it's aligned.

Notes: 

I printed this with PLA without any supports, using 15% infill. I added the holes to minimise filament use, but it still strong enough for the job.

Tags