Trådfri Remote holder for IKEA Skådis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple plate for mounting IKEA's Trådfri Remote on an IKEA Skådis pegboard.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A simple mounting plate for attaching an IKEA Trådfri remote (the round one) to the IKEA Skådis pegboard. The mounting plate is attached to the pegboard using a screw and a T-Nut, and the remote is attached to the plate using the magnetic attachment plate that came with your remote. The double sided tape is not needed as the plate has pegs that match the screw holes in the magnetic plate.
I've uploaded a few variants of the plate but you only need to print one.
Print settings
I printed this on a Prusa Mini with 15% infill using the 0.2mm Quality profile in PrusaSlicer.
If your printer isn't well calibrated you may want to print in even finer detail (0.15) or slower so the pegs come out just right. Otherwise there might be too much play between the parts.
What you need:
M2.5 T-Nut (1), M2.5 nut (1) and M2.5x12mm screw (1).
For easier alignment you can also use the alignment guides from the T-Nuts project (optional but recommended).