Integrated Auto-Rewind Spool Holder - Improved Frame and Axle Design
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.68 – €4.50 net (excluding VAT)
For file: Frame-x-beams_0.2mm_PETG_MK3SMMU2S_4h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.09 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 4.26 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Frame, cross beams, and axle are redesigned to allow hardware free, clip-in assembly.
- Rating
- 4.75 / 5
- Likes
- 55
- Downloads
- 327
- Makes
- 4
- Views
- 1,947
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly
Axle clip is strong enough to support weight of 1kg spool, but can still be easily removed by using your finger to lift on axle near the clip on each side.
Two 608 style bearings per spool
Mine printed fully in Inland PETG - the cardboard spool also works very well for the rewinder as it adds friction to the axle.