Nissan brake pedal stopper (universal)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
its a brake pedal stopper, the original stopper wears out through out the years this is a common S and R chassis fix
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 434
- Makes
- 2
- Views
- 1,428
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
so as it states this is a brake pedal stopper, this stopper will work on most S (Silvia) chassis cars, R (skyline) chassis, Laurel Chassis, Cefiro, infiniti G.., most Z (Fairlady/ 350z,370z etc) chassis, Altima, Maxima, Sentra, Pulsar, Frontier, Stagea and many more.
this stopper can also be used for a few toyota's and hyundai's but mainly Nissan
few months ago i came across a problem with my 90's Nissan (Skyline) where the brake lights would stay on when the car wasnt running. The most common problem to this is that the rubber stopper on the brake pedal went bad this could be due to age, moisture and greases.
(this stopper engages the brake switch that turns the brake lights off)
in the picture you can see my old rubber that went bad. You could either buy a brand new rubber OEM from Nissan for $$ or print your self one for less and thats what i did
incase you are to lazy to print and want to buy the OEM part here is the part number
46584-S0100 ("Nissan sells this as a pack of 10 you will have to buy from other places if only needed 1")
as for printing wise i suggest to print this in ABS, PETG, NYLON, or TPU when printing in PLA the stopper tend to become brittle overtime and will snap or pop out of the socket ("i have no experience with PLA+")