1 / 3
Ikea Jansjo lamp v-slot attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add an ikea gooseneck lamp to light up your 3d printer!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Add an ikea gooseneck lamp to light up your 3d printer! This mod allows you to attach the lamp stalk directly to your printer without using the big heavy round base it comes with.
Tested and works with my Mk2.5s full bear frame.
Print with flat side down, recommend PETG/abs with 15% gyroid infill for strength.
You will need M5 8mm screws and t-nuts for attaching to the v-slot extrusions.
Print instructions
Print with flat side down, recommend PETG/abs with 15% gyroid infill for strength.
You will need M5 8mm screws and t-nuts for attaching to the v-slot extrusions.