1 / 4
Replica of Toyota Part 75833-14030 Panel, Lower Back Finish - for MK3 Supra — image 1
1 / 4

Replica of Toyota Part 75833-14030 Panel, Lower Back Finish - for MK3 Supra

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Trim pieces to help secure the taillight centerpiece from a facelift Mk3 Supra.

Rating
0 / 5
Likes
9
Downloads
60
Makes
0
Views
724
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

These trim pieces are easy to break when removing the center taillight piece. The original pieces are aluminum with steel mounting studs. They included models are:

  • 75833-14030 - Left side (#2 in the diagram)
  • 75832-14060 - Right side (#2 in the diagram)
  • 75849-14020 - Left end pad (#3 in the diagram)
  • 75847-14050 - Right end pad (#3 in the diagram)

Print these with a strong, vibration-resistant filament. I left stalks where the bolt studs should be.  I've also included a model of an m5 flange nut. I will attach them by threading an gluing the nut on.

The end pads are originally rubber. I recommend a soft TPU.

When mounting, consider that the outer mounting holes must be water-tight. Originally, Toyota used a foam washer for this. If you're printing this part, you should find your own water-tight solution (the end pads are for vibration isolation only).

Tags