80mm HD Tool-Mount for MPCNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this tool mount a spindle with 80 mm outer diameter (min. 165 mm high) can be installed on the MPCNC.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 203
- Makes
- 2
- Views
- 1,287
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this tool mount a spindle with 80 mm outer diameter (min. 165 mm high) can be installed on the MPCNC. I use this mount with a 2.2 kW chinese spindle.
The mount is designed for the new "Primo" version (F 25.0 mm) and is screwed directly to the Z-tubes. The original tool plates are not required.
To fix the body and cover, 10 M5x25 screws and M5 nuts are required. The z-tube nut holder fits also for M5 nuts.
Print instructions
Print with min. 60 % infill, in PTEG or ASA, no support needed.
I have printed some of the mounts in the meantime. Here are some tips.
- First of all, the model should be positioned lengthwise to the direction of travel from the bed (y-axis).
- Later I printed both parts at once and positioned them with only 2/3 perimeter distance (0,3 mm) next to each other, so they support each other.