1 / 1
Endcap for 25x40 mm Tube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This endcap for 25x40x1.5 mm square tube has a 12 mm hole for mounting a adjustable foot.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This endcap for 25x40x1.5 mm square tube has a 12 mm hole for mounting a adjustable foot.
Note
The hole has a diameter of 12 mm. To hold the force of the foot, an adequate nut (M12) and a washer must be mounted under the end cap.
Print instructions
Depending on the load, the infill should be increased to up to 90%.