Atomic Pi DIN Rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount to attach the Atomic Pi to a pair of Voron PCB Din clips, which in turn allows mounting it to a DIN rail
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
For mounting Atomic Pi to DIN rail using Voron DIN-rail-mounts. Board is mounted base (without breakout board) and can safely fit in electronics bay of Voron 2.4.
Printing
No supports needed, print with standard Voron printed parts settings. I printed this using ASA, but ABS should also work.
Assembly
Hardware:
- 8x M2x10 self-tapping screws
Attach bracket to Voron DIN rail mount, then attach Atomic Pi to brackets.
Design Notes
Part was designed from scratch using Octopus bracket as inspiration; adjustments were needed to clear bottom IO connector. Be careful applying force to the Atomic Pi board; the distance between the board mount and DIN mount can cause the part to crack/break.
It is possible to shorten this distance by reducing the X-clearance and increasing the Z-clearance of the bracket for the IO port, but the board's heatsink is already close to the bottom panel of the electronics bay.
References
Voron DIN rail mounts: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
Atomic Pi: https://digital-loggers.com/api.html