Atomic Pi DIN Rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount to attach the Atomic Pi to a pair of Voron PCB Din clips, which in turn allows mounting it to a DIN rail
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
For mounting Atomic Pi to DIN rail using Voron DIN-rail-mounts. Board is mounted base (without breakout board) and can safely fit in electronics bay of Voron 2.4.
Printing
No supports needed, print with standard Voron printed parts settings. I printed this using ASA, but ABS should also work.
Assembly
Hardware:
- 8x M2x10 self-tapping screws
Attach bracket to Voron DIN rail mount, then attach Atomic Pi to brackets.
Design Notes
Part was designed from scratch using Octopus bracket as inspiration; adjustments were needed to clear bottom IO connector. Be careful applying force to the Atomic Pi board; the distance between the board mount and DIN mount can cause the part to crack/break.
It is possible to shorten this distance by reducing the X-clearance and increasing the Z-clearance of the bracket for the IO port, but the board's heatsink is already close to the bottom panel of the electronics bay.
References
Voron DIN rail mounts: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
Atomic Pi: https://digital-loggers.com/api.html