1 / 3
Steam Roller toy with patterned rollers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A steam roller toy that has patterned rollers. The 25mm grid is sized to be compatible with tabletop miniatures.
- Rating
- 5 / 5
- Likes
- 175
- Downloads
- 381
- Makes
- 6
- Views
- 1,870
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This is a model I designed for the ToyCars competition.
Assembling the steamroller.
Start by printing
- Main body
- Two wheels
- Roller Axles
- Rear Axles
- At least one roller (smooth, hex, grid, herringbone, etc)
All 3mf files have parts separated for multi-material printing
Recommended print settings:
- Layer height: 0.2
- Infill 15% Pattern: any structural (adaptive cubic, gyroid, cubic, etc)
- Supports, brim, etc: not needed
- Material: PLA
Step 1: Remove mouse ears.
The rear axle has some additional material to stabilize it when printing. After removal the axle should look like this
Step 2: lay out all parts to make sure everything's there:
Step 3: Place hollow end of rear axle through the wheel and attach the hubcap
Step 4: Attach wheels to body
Step 5: Assemble slide in roller and attach the roller pins.
Caution: pins may get stuck if you assemble with excess force.
Step 6: Get some modeling clay or Play Doh and have fun
