1 / 3
Steam Roller toy with patterned rollers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A steam roller toy that has patterned rollers. The 25mm grid is sized to be compatible with tabletop miniatures.
- Ocena
- 5 / 5
- Polubienia
- 175
- Pobrania
- 381
- Wydruki
- 6
- Wyświetlenia
- 1870
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (279)Powiązane
This is a model I designed for the ToyCars competition.
Assembling the steamroller.
Start by printing
- Main body
- Two wheels
- Roller Axles
- Rear Axles
- At least one roller (smooth, hex, grid, herringbone, etc)
All 3mf files have parts separated for multi-material printing
Recommended print settings:
- Layer height: 0.2
- Infill 15% Pattern: any structural (adaptive cubic, gyroid, cubic, etc)
- Supports, brim, etc: not needed
- Material: PLA
Step 1: Remove mouse ears.
The rear axle has some additional material to stabilize it when printing. After removal the axle should look like this
Step 2: lay out all parts to make sure everything's there:
Step 3: Place hollow end of rear axle through the wheel and attach the hubcap
Step 4: Attach wheels to body
Step 5: Assemble slide in roller and attach the roller pins.
Caution: pins may get stuck if you assemble with excess force.
Step 6: Get some modeling clay or Play Doh and have fun
