YubiKey 5C NFC Case/Keychain (USB C only) with STEP file
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.65 – €0.79 net (excluding VAT)
For file: YubiKey 5 NFC case_0.2mm_PETG_MK3S_56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 55.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed something to protect my YubiKey from random bumps and scratches in my pocket.
- Rating
- 4.643 / 5
- Likes
- 159
- Downloads
- 1,815
- Makes
- 14
- Views
- 8,876
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
YubiKey 5C NFC Case/Keychain (USB C only)
I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them.
It is intended to use case cap as main holder of the key to prevent wear, the bottom part slides off and on.
Print settings and instructions
Use PETG or ABS, added flexibility is needed for spring latch to properly work.
Use included 3mf file with everything set up (PrusaSlicer) or use provided gcode (tested on Prusa MK3/S+).
Print each STL file one time. Lay them down on flat side. Keychain hole needs supports (YubiKey 5 NFC case - cap bottom.stl).
Use 0.2mm layer height, 15% infill, don’t use brim.
You may enable ironing on top surfaces, for the key to easily slide.
Assembly
All parts press fit together, glue shouldn’t be necessary.



