Trash Walker
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.90 – €2.32 net (excluding VAT)
For file: Print files in separate colors / foot_025mm_pla_mk3smmu2s_1h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.11 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.99 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hi! This a Remix of some parts used in my previous design Tow Walker. UPDATE 30/6/2018:: added 'long-bin.stl' . a…
- Rating
- 5 / 5
- Likes
- 210
- Downloads
- 527
- Makes
- 41
- Views
- 2,259
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Hi!
This a Remix of some parts used in my previous design Tow Walker.
UPDATE 30/6/2018:: added 'long-bin.stl' . a 25mms taller bin suitable for tools or other stuff :D
Useful as a penholder, desktop bin, planter or if you can print at a huge scale you can made a fantastic trash bin.
There's two versions of the bin. One ready to print as is and another prepared for printing using vase mode (or spiralized in some slicers)
Hope you enjoy it!!
Have fun!!
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Notes:
The 'ring.stl' needs supports. Other parts can be printed without supports.
Tolerances set between 0.2 and 0.25 mms. Should be printed and assembled easily
Pictures don't do justice to the fantastic Fillamentum Noble Blue / Rapunzel Silver / Concrete Grey colour Combo used
Long-bin.stl comparison
Printed by Richard (Twitter: @3DPrinTek), thanks for a nice photo!!
Category: Containers