1 / 5
Spool Mount - IKEA LAK
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount to create a spool holder between 2 vertical surfaces. In my case I use an IKEA LAK table.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple mount to hold in place a piece of 25mm pipe that will allow you to organise the spools.
I have it mounted on an IKEA LAK table to feed an MMU2s buffer (https://www.printables.com/model/77054-mmu2s-buffer-inspired-by-rmu-buffer). For this, you need a piece of pipe with 445mm (confirm the measure on your table).
I've printed the mount with PETG but it can be printed in PLA or other filaments you like.
It's a simple but effective piece.
If you print it share it with us in the make section.