Pinball controller cabinet trim

Printed trim for a wooden pinball controller cabinet with button plates specifically designed for Pinball FX3.

Pinball lockbar trimmed X2 includes both left and right lockbars and are the only parts requiring 100% (allows for easy filing to fit trim around the button plates).

Rounded corner palm rest is not absolutely required, but designed to mitigate some of the sharp corner edges/corners. Secured with double sided gel tape.

Joystick hole cover was designed to fit a 30mm hole, adjust your slice accordingly to fit your hole (mine was 29mm so a 95% global adjustment did the trick).

My cabinet came it at 27 3/4" wide.

I've included the leg brace I used (https://www.thingiverse.com/thing:4566594) .

This front controller was designed to be used in conjunction with a fixed angle monitor stand (build log https://hardwarecanucks.com/forum/threads/fixed-angle-32-monitor-stand-portrait-mode-pinball.81834/) (monitor shims https://www.thingiverse.com/thing:4545332)

Build log for the controller starts at post #62.

Print instructions

Category: Video Games Summary

Printed trim for a wooden pinball controller cabinet with button plates specifically designed for Pinball FX3.

Pinball lockbar trimmed X2 includes both left and right lockbars and are the only parts requiring 100% (allows for easy filing to fit trim around the button plates).

Rounded corner palm rest is not absolutely required, but designed to mitigate some of the sharp corner edges/corners. Secured with double sided gel tape.

Joystick hole cover was designed to fit a 30mm hole, adjust your slice accordingly to fit your hole (mine was 29mm so a 95% global adjustment did the trick).

My cabinet came it at 27 3/4" wide.

I've included the leg brace I used (https://www.thingiverse.com/thing:4566594) .

This front controller was designed to be used in conjunction with a fixed angle monitor stand (build log https://hardwarecanucks.com/forum/threads/fixed-angle-32-monitor-stand-portrait-mode-pinball.81834/) (monitor shims https://www.thingiverse.com/thing:4545332)

Build log for the controller starts at post #62.

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: No

Supports: No

Resolution: .2

Infill: 15

Filament: Generic from Waterbird PLA Black / Transparent
Notes:

As noted above, Lockbar X2 printed @ 100% to allow them to be easily filed to fit around button plates.

Printed on creality magenetic bed surface @ 200 / 45C.

Button holes designed for 30mm / 24mm arcade buttons.