CC2531 Zigbee Stick Housing Low Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile housing for CC2531 Zigbee stick. Parts are joined with glue to achieve an even lower profile.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Print this Model without any supports and with a layer height of .2 mm and 90% infill.
You may need to heat up the cap after printing to make it conform better around the USB-A connector so it won't fall off.
To close up the enclosure use superglue or a suitable alternative.
The enclosure uses a retention mechanism wich prevents the stick from rattling around in the enclosure.
After inserting the stick into the housing, you may want to heat up the retention slot and press the back of the stick into place. Alternatively you can use (hot-) glue.