1 / 2
LED strip Holder - Soldering station
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Third hand for solding wires to LED strip. Make 90 deg corner.
- Rating
- 5 / 5
- Likes
- 106
- Downloads
- 306
- Makes
- 2
- Views
- 2,029
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Simple base to hold your LED strip to solder your wire. Perfect to make 90 deg corners.
I used a leftover silicone mat to protect de base from the soldering iron.
In the corner, you can add weight to help holddown the base to be sure that nothing move when you are soldering.
2 bases options.
- base with a 30mm x 30mm x 1mm cutout
- base without the cutout
Print 1 base and 2 screws.
With the settings bellow, the thread on the holes and screw work flawlessly. My layer height was 0.16 mm.
My print settings:
- resolution (Layer height) 0.16 mm or better.
- 4 perimeters
- 40 % infill
- No support
- 6mm brim for better adhesion
- use the orientation of the STL files