Flux & accessory holder for Sturdy Solder Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds flux dispenser, desoldering braid & other accessories. Connects to solder rack magnetically.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds flux dispenser, desoldering braid & other accessories. Connects to Sturdy Solder Rack magnetically. I use 8mm x 2mm disc magnets.
The flux dispenser I use is a 6ml Repeating Dispenser which works great if you use flux from a can.
In the pictures, my color breaks are about 6mm and 40mm height. Printed at 0.15mm layers with a 15% infill. This was done in Hatchbox/Overture PLA with no supports.
I've also added 1/16" adhesive foam to the bottom of mine to keep it from sliding around during use.
This is an original work, inspired by many other designs that I've seen & tried. I do a lot of work with an iron in my hand, so my tools need to hold up. This continues to be an evolving project.