Flux & accessory holder for Sturdy Solder Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds flux dispenser, desoldering braid & other accessories. Connects to solder rack magnetically.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds flux dispenser, desoldering braid & other accessories. Connects to Sturdy Solder Rack magnetically. I use 8mm x 2mm disc magnets.
The flux dispenser I use is a 6ml Repeating Dispenser which works great if you use flux from a can.
In the pictures, my color breaks are about 6mm and 40mm height. Printed at 0.15mm layers with a 15% infill. This was done in Hatchbox/Overture PLA with no supports.
I've also added 1/16" adhesive foam to the bottom of mine to keep it from sliding around during use.
This is an original work, inspired by many other designs that I've seen & tried. I do a lot of work with an iron in my hand, so my tools need to hold up. This continues to be an evolving project.