1 / 3
Prusa Mini Bondtech Bowden Adapter PC4-M6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to allow use of a PC4-M6 bowden fitting rather than the harder to find PC4-M8 fitting that come standard
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 89
- Makes
- 2
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
PC4-M6 to M8 adapter with additional ‘bowden’ to keep the filament constrained until it reaches the bowden in the fitting.
Printed in eSun ePA-CF at 0.05mm layer height which matches the bondtech pretty well.
Printed without supports, but might need less clean up with some supports on the inside. cleaned filament path with a 1.9mm drill after printing.