ATV / motorcycle battery using 38120 headway cells
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
custom diy LiFePO4 battery best suited for motorcycle , ATV or snowmobile etc...
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 231
- Makes
- 1
- Views
- 1,587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
custom LiFePO4 battery based on headway 38120 HP cells .Cells are 8AH with 200A discharge rating .Be extra careful while handling those cells .
I got the cells and bus bars from batteryhookup.com .
nominal cell voltage is 3.2V , 4 cells gives 12.8V which is perfect to replace your stock battery .
there are holes made in the holders in case BMS or balancing circuit is used .
extra hardware needed : 2 M6 bolts , 4 M4 bolts , 3 bus bars , battery wires and 4 38120 cells .
Also, threads are directly tapped into the plastic ,M6 and M4 taps are needed .
“holder” part needs to be printed twice .