1 / 1
spider-pro-nozzle-mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to use ADXL345 nozzle mount for Creality Spider Pro with optional tightening screw
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 308
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
An ADXL345 nozzle mount for Creality Spider Pro.
Main design goal was easy, quick, and tool-less mount without removing the nozzle.
Easiest way to mount it is from back to front. The fit should be tight enough by itself, but if needed, there's room for heatset insert (M3x5x4) and a tightening screw (M3x6).
The model expects M2x10 self tapping screws for mounting the accelerometer board, with the holes being 15mm apart (for generic ADXL345 board).
For different boards, there's the step file provided for editing.