Jewelery Tray | Multi-Purpose Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Jewelery Tray that's easy to make on a CNC-Router or with a 3D-Printer.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 67
- Makes
- 0
- Views
- 1,148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This Model can easily made with a CNC or with a 3D-Printer.
You can stack as many Top-Pieces on top of one another as you want, but I'd advise to use no more than 3-4, since it will become very top heavy and will have a tendecy to tip over.
You'll need to cut an 8mm Rod to the length you need, which is easily achieved with an angle grinder, a small Dremel cut-off tool or simply with a Hacksaw.
This rod will act as the pivot point for the compartements and works best if its a press-fit in the bottom piece and a looser fit in the top pieces.
Have fun making, and if you show me what you made, that would make me very happy:)
For those of you that have a CNC-Something, I also included the DXF-Files.