1 / 2
Sovol SV01 E3D REVO Nozzle Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
REVO Nozzle Holder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a variation of my other REVO nozzle holder design.
It still has two slots for 8x3mm neodymium magnets. It fits in the slot of the base extruder rail, while the magnets hold it in place utilizing the electronics enclosure. Take a look at the pictures if this does not make sense.
Material: PLA
Nozzle: 0.4mm (The one pictured was printed with a 0.8mm nozzle, which threw off the tolerances enough that the nozzles fit a little too snug. Use a 0.4mm.)
Layer Height: 0.2mm
Supports: Yes, to build plate only
Plate Adhesion: I suggest using a raft as there is minimal contact area with the plate.