1 / 5
IKEA Hultarp Hook Retaining Clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents Hultarp hooks to be lifted and fall off the holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 105
- Makes
- 0
- Views
- 1,074
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These tiny clips keep the Hultarp hook in place. They allow for a free swivel, but will stop the hook from being lifted.
You need 2 parts per hook with total print time @ 5 minutes and 0,4g of filament.
- insert
- clip
Please PRINT MULTIPLE pieces, as they are small and relatively brittle during installation.
Printing:
- layer height max 0.2mm
- any material PLA/PETG,…
- printing orientation as shown in pics
- no supports/brim
Installation:
- with hook in place, lift it and fit the insert into hole from behind
- then, insert retaining clip in the groove