IKEA Bjorksnas Dresser Drawer Knob Adapter Bushing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter bushing for IKEA BJÖRKSNÄS dressers to allow normal drawer knobs/pulls to be used instead of the leather straps.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Adapter bushing for the IKEA BJÖRKSNÄS dresser to allow a normal drawer knob or drawer pull to be used instead of the leather pull loops.
The dresser has oversized holes to fit the barrel of the T-Nut that the leather loops screw into, but the holes are too large for the standard #8 or M4 screw used for most drawer knobs. This adapter bushing has an OD that is designed to be a slip fit into the holes and a tight fit around the screws (you may need to thread the screws into the hole in the bushing).
Print with 100% infill, or just with enough walls that you don't need any infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
100%
Filament:
SainSmart PRO-3 Series PLA Post-Printing =============Without the bushing, the holes in the drawers are too large for a standard #8 or M4 knob screw.

Thread the #8-32 or M4 screw into the bushing:

Insert bushing into the rear of the drawer:

Screw sticks out the front, ready to thread a knob onto.

Category: Household
