IKEA Bjorksnas Dresser Drawer Knob Adapter Bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter bushing for IKEA BJÖRKSNÄS dressers to allow normal drawer knobs/pulls to be used instead of the leather straps.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Adapter bushing for the IKEA BJÖRKSNÄS dresser to allow a normal drawer knob or drawer pull to be used instead of the leather pull loops.
The dresser has oversized holes to fit the barrel of the T-Nut that the leather loops screw into, but the holes are too large for the standard #8 or M4 screw used for most drawer knobs. This adapter bushing has an OD that is designed to be a slip fit into the holes and a tight fit around the screws (you may need to thread the screws into the hole in the bushing).
Print with 100% infill, or just with enough walls that you don't need any infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
100%
Filament:
SainSmart PRO-3 Series PLA Post-Printing =============Without the bushing, the holes in the drawers are too large for a standard #8 or M4 knob screw.
Thread the #8-32 or M4 screw into the bushing:
Insert bushing into the rear of the drawer:
Screw sticks out the front, ready to thread a knob onto.
Category: Household