1 / 1
30mm Jumbo Gluestick Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
30mm Jumbo Gluestick Holder
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find quite what I wanted, so I made something new. This is a holder that can be attached to an enclosure with wood screws or double-sided tape. The holes were designed to work with #6 or 3.5mm wood screws. The holder was designed for Elmer's Jumbo gluesticks that measure about 30mm in diameter.
I printed mine with PETG, at 0.24mm layer height. Walls, top, and bottom 1.4mm thick with 40% cubic infill. Tree supports for the holes.