1 / 4
PC PSU Cable Combs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable Combs for PC PSU Sleeved Cables
- Rating
- 5 / 5
- Likes
- 308
- Downloads
- 1,709
- Makes
- 11
- Views
- 6,346
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I couldn't find a cable comb that suited my taste, so I designed it.
Print settings:
- Filament: PETG (I recommend against using PLA due to its potential for deformation caused by heat.)
- Layer height: 0.2mm
- Supports: no
- Perimeters: 3
Notes:
- Be careful to the seam position being visible from the front, as it will spoil the otherwise nice appearance :(
- I recommended to print only one piece to check the size first.
Scale size tips:
Commonly retailed cables, awg 18 wire with 3mm sleeves do not need to be rescaled, just print as is. (Please adjust scale if you needed)
If you have a custom sleeved cable using awg 16 wire with 4mm sleeves, please adjust the scale to ±106%.
