HSW customizable worklight holder with magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable holder for worklight or other things with magnet or metal plate on the bottom to Honeycomb storage wall
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 49
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Holder for worklight or other things with magnet or metal plate on the bottom to Honeycomb storage wall.
This thing customizable throw OpenScad file. You can customize:
- Plate dimensions: lenght, width, thickness
- Plate shape: oval, rectangle, rounded rectangle
- Magnet dimensions: lenght, width, thickness
- Magnet shape: rectangle, circle, oval, none
- Distance magnet udner plate surface
- Mount wall thickness
- HSW attach type: insert, hexagon, M3, M4
This OpenScad file need "hex plug library.scad" for working. You can grab this file here: https://www.printables.com/model/260073-openscad-library-for-hsw-attachments
File contains "Debug magnet mode". Turn on if you want make magnet visible along plate.
Warnings:
- Watch out for magnet polarity!
- Do not forget add pause in slicer to place magnet!
- At least two layers must cover magnet! So 0.4mm minimum if you use 0.2mm layer.
- On Prusa MK3 print from sd card not by octoprint! In my case after pause to insert magnet print resumed, but hotend did not heat up.
- When print insert and hexagon attachment use supports.