1 / 12
Dry Box Spool Holder - 8mm bar - 2 types
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy-to-print designs to hold your spools inside a Drybox: fixed at the wall or vertical to be used anywhere
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
These supports were designed to withstand 8mm rods to hold spools inside a dry box.
V1.1:
- Added a back support for the quick fit that is threaded on the dry box for more rigidity. Based on M10x1 screw
There are two options:
- Holder to be fixed at the wall (smaller, but require some screws and bolts
- 4x 30mm M3 screws (you can use up to 6)
- 4x M3 nuts
- holder that is self supported. Can be used to hold anything external
My print settings that you can use for reference:
- Material: ABS
- Layer Height: 0.20mm
- Temp: 230°C
- Printer: Voron Trident