1 / 3
Vacuum Switch Holddown Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created these clamps to hold my Ortis Automatic Vacuum Switch to my dust collection barrel to prevent it from falling.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ortis Automatic Vacuum Switch hold down clamp
I needed a way to prevent my automatic vacuum switch from falling all the time so I created these clamps to attach the switch to the top of my collection drum. Simply mount one clamp to either side of the switch case and screw it down to tightly hold the switch module. This is a no-brainer seeing how the switch will always stay with the collection drum.
I printed this using PLA but you can use any filament you have on hand.
My settings:
- 50% infill
- 4 layers top and bottom
- 3 perimeters