M5 press-fit thumb screw and captive nut for Sneaks' Articulating Raspberry Pi Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the camera mount.
- Rating
- 4.8 / 5
- Likes
- 106
- Downloads
- 496
- Makes
- 9
- Views
- 2,835
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks.
Some comments
Thumb screw
Since there are a few variations for the M5 socket head cap screw on the market, I included two version for the thumb screw: one with straight sides which can be used with larger head screws, and one with relatively aggressive “dimples” that provide more interference and a tighter fit.
In the photos, I used a M5 x 18mm for the camera mount.
Nut
The nut itself has a loose fit so it can be inserted during print. Unless you're a ninja, this is better accomplished by adding a pause at z = 6 mm to insert the nut and then resume printing. The provided Gcode includes such pause.
Printing instructions
Default settings with PETG and layer height of 0.20 mm worked well. I also use a concentric bottom layer fill pattern for a better visual effect.