1 / 1
M5 press-fit thumb screw and captive nut for Sneaks' Articulating Raspberry Pi Camera Mount — zdjęcie 1

M5 press-fit thumb screw and captive nut for Sneaks' Articulating Raspberry Pi Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the camera mount.

Ocena
4,8 / 5
Polubienia
106
Pobrania
496
Wydruki
9
Wyświetlenia
2835
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks.

Some comments

Thumb screw

Since there are a few variations for the M5 socket head cap screw on the market, I included two version for the thumb screw: one with straight sides which can be used with larger head screws, and one with relatively aggressive “dimples” that provide more interference and a tighter fit.

In the photos, I used a M5 x 18mm for the camera mount.

Nut

The nut itself has a loose fit so it can be inserted during print. Unless you're a ninja, this is better accomplished by adding a pause at z = 6 mm to insert the nut and then resume printing. The provided Gcode includes such pause. 

Printing instructions

Default settings with PETG and layer height of 0.20 mm worked well. I also use a concentric bottom layer fill pattern for a better visual effect.

Tagi