1 / 1
JayzTwoCents GPU Anti-Sag PCIe Slot Cover — image 1

JayzTwoCents GPU Anti-Sag PCIe Slot Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This was created based off of the YouTuber JayzTwoCents, design that helps solves the GPU sag issue on new GPUs.

Rating
3 / 5
Likes
19
Downloads
224
Makes
1
Views
2,100
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I took the idea for this model from JayzTwoCents video on sagging GPUs.(Link Below) I have gone ahead and created some PCIe slot covers that are extra thick on the back to help prevent your GPU from sagging due to poor design of 30 series and 6000 series cards as talked about in the Jayz video. There are multiple different thicknesses, so it should cover just about any GPU you might have. The sizes range from 1.5mm to 5mm extra thickness on the back of the slot cover. Hope this will help some of you. Thanks for your support and if you have any suggestions on how to improve the models let me know in the comments.

 

I would recommend printing these in PLA at like 25% infill, you should not need much tougher filament than PLA and that infill should be good enough for the use case.

 

The original link for the video by Jay:

Tags