1 / 1
JayzTwoCents GPU Anti-Sag PCIe Slot Cover — zdjęcie 1

JayzTwoCents GPU Anti-Sag PCIe Slot Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This was created based off of the YouTuber JayzTwoCents, design that helps solves the GPU sag issue on new GPUs.

Ocena
3 / 5
Polubienia
19
Pobrania
224
Wydruki
1
Wyświetlenia
2100
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I took the idea for this model from JayzTwoCents video on sagging GPUs.(Link Below) I have gone ahead and created some PCIe slot covers that are extra thick on the back to help prevent your GPU from sagging due to poor design of 30 series and 6000 series cards as talked about in the Jayz video. There are multiple different thicknesses, so it should cover just about any GPU you might have. The sizes range from 1.5mm to 5mm extra thickness on the back of the slot cover. Hope this will help some of you. Thanks for your support and if you have any suggestions on how to improve the models let me know in the comments.

 

I would recommend printing these in PLA at like 25% infill, you should not need much tougher filament than PLA and that infill should be good enough for the use case.

 

The original link for the video by Jay:

Tagi