Honda Acty Defrost Vent Gauge Pod - 52mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
52mm gauge pod for the Honda Acty kei truck. The original defrost vent pops out and this pops in to replace it.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 524
- Makes
- 2
- Views
- 3,588
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge.
I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them:
- 2x M3 - 5mm Threaded inserts
- 2x M3 - 6'ish mm Bolts

As a result of needing the inserts the wire opening hole is only 7mm wide resulting in the plug for my tach not fitting. I got around this by just depining the plug, running them through and repining.
I'll include an untested file if you wish to print this as one unit to allow a larger wire opening


Plug in and install the gauge, it is just press fits in. My gauge was a little loose so I wrapped it one time in tape.

I recommend making sure your gauge is rotated the way you want it to be. The front clip that locks the vent is not the strongest and is prone to snapping off if you torque on the gauge wrong.

You can now snap the vent in place.

Printed in ASA
Feel free to print in any orientation
I printed the vent with the top facing the build plate with no supports, and the gauge face down with supports.

