1 / 2
Bluetooth Corne Mini Choc w/ Magnetic Travel Mode — image 1
1 / 2

Bluetooth Corne Mini Choc w/ Magnetic Travel Mode

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Corne 3x5 Bluetooth for Choc v1. Halves attach with magnets for travel.

Rating
0 / 5
Likes
27
Downloads
161
Makes
0
Views
2,241
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

PCB: https://github.com/petejohanson/crkbd/tree/board/corne-ultralight

Top plate is designed for Choc v1 switches. The area below the controller covers where the jst connector would be in Pete's design. I chose to solder my batteries directly to the pcb instead of using the jst for a cleaner look. Room is left to the right of the jst for the on/off switch and reset button.

Bottom plate has insets to accept 6x2mm magnets (5 per side) and standoffs that accept 3mm deep m2 heat set inserts for attaching top to bottom. The bottom of the plate has insets to accept 8mm diameter rubber feet. Feet should be < 3mm in depth each. They feet should be positioned in complimentary holes per side so that the feet nest together when the plates mate via the magnets.

Printing: Top can be printed upside down with no supports. 

Tags