Bluetooth Corne Mini Choc w/ Magnetic Travel Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corne 3x5 Bluetooth for Choc v1. Halves attach with magnets for travel.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 2241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
PCB: https://github.com/petejohanson/crkbd/tree/board/corne-ultralight
Top plate is designed for Choc v1 switches. The area below the controller covers where the jst connector would be in Pete's design. I chose to solder my batteries directly to the pcb instead of using the jst for a cleaner look. Room is left to the right of the jst for the on/off switch and reset button.
Bottom plate has insets to accept 6x2mm magnets (5 per side) and standoffs that accept 3mm deep m2 heat set inserts for attaching top to bottom. The bottom of the plate has insets to accept 8mm diameter rubber feet. Feet should be < 3mm in depth each. They feet should be positioned in complimentary holes per side so that the feet nest together when the plates mate via the magnets.
Printing: Top can be printed upside down with no supports.