1 / 1
4x5 film development tank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the combiplan. Print in black ABS and acetone smooth to make it waterproof. Glue parts together with acetone.
- Rating
- 5 / 5
- Likes
- 117
- Downloads
- 599
- Makes
- 2
- Views
- 4,190
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
DO NOT GLUE THE TOP FILM RETAINER
It should be loose so you can slide film in/out.
Use a dummy sheet of film to get the tolerances right before permanently gluing together.
Open source with STEP files
26.02.23
Updated to v3
- Light proof lid, can fill tank in ~8 seconds, empties in ~6 seconds.
- Uses TPU seals, print in soft TPU for good seal (tried with 95A TPU, does not work)
- Uses 2x M3 threaded brass inserts and 2x M3 40mm bolts for the latches
Might be better to use silicone for seal.