PixelWing Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure designed for the PixelWing ESP32-S2 RGB Matrix by Oak Development Technologies
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
An enclosure designed for the PixelWing ESP32-S2 RGB Matrix by Oak Development Technologies. I created it for use with TallyCircuitPi, a tally light platform used with OBS to indicate which cameras are live during a broadcast.
The print comes in two parts: the front which is intended to be used as a diffuser for the super-bright LEDs and interchangeable back parts which snaps to the enclosure and allows you to use the enclosure on a camera mount, a stand-alone light, or with a velcro loop. Gaps are left for access to the reset button + LED, the USB-C port on the side, and the ESP32 antenna at the top.
The interchangeable backplates either have a flash shoe mount to attach to a camera, or a foot to allow it to stand on a flat surface, or a simple loop so it can hang from a mount using a velcro strap or the like.
Printed on an M3D Micro+ at "high" detail and low infill. Even on that printer the standoffs for mounting and snap-together came out okay. If it can print on the Micro+, it should be able to print easily on most printers even at a low resolution.
Notes:
The front portion should be transparent or translucent (crystal white is preferred), the rear portion can be any color you wish.
Can print at relatively low resolution - low-poly model that is thin enough to largely not need infill.