Kaufland glue gun stand with glue stick compartment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 2-part glue gun stand.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 121
- Makes
- 0
- Views
- 1,121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a 2-part glue gun stand. I designed it to hold the FMGG6996 (TY-G6006) 80W glue gun, which I bought in Kaufland, but I think Lidl had the similar sized ones. The gun's front part, which goes in the stand is 30x46 mm, and the stand is 35x50 mm inside.
There are 2 parts, which can be used separately:
- Stand, which holds the gun
- Box, which has a space for 11 mm glue sticks
Both are assembled with 4 M3x10 screws. Holes in the box are 2,5 mm in diameter, so the screws should thread directly into them without issues, but you might run a 2,5 mm drill through to clean them.
If you want, you can use the stand without the box and screw/glue it whenever you want.
The parts were designed to print without supports
The pictures show the first design, which has been slightly improved - the box is taller, so it can hold 2 stacks of sticks and the stand is a little beefier now.
STEP files are included - feel free to adapt the parts to your needs if you'd like to.
Print instructions
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0,1-0,5
Filament: Prusament PETG Neon Green
Notes:
I've printed this with Prusament Neon Green PETG with 0.6 mm nozzle and 0.5 mm layer height.