1 / 2
macbook pro 13" late 2013 stand — image 1
1 / 2

macbook pro 13" late 2013 stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position.

Rating
5 / 5
Likes
14
Downloads
76
Makes
0
Views
627
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position.

To protect the macbook's surface from scratches I glued 6 felt protectors into the appropriate positions. The protectors I used were about 10mm in diameter and 3mm in height.

The original CAD was created in onshape. With your own account you can import and modify, without account you can export numerous different CAD formats (sorry no OpenSCAD for this quick design).

Print instructions

The first print without support failed due to bad bed adhesion. I reprinted with supports but found that my first layer calibration was off. The maximum overhang is 60°, so it should be possible to print without supports (may need brims though).

Recommendation:

  • 3 perimeters
  • 25% gyroid infill
  • print with variable layer height (.2mm base layer height)
  • use supports

Tags