1 / 2
macbook pro 13" late 2013 stand — zdjęcie 1
1 / 2

macbook pro 13" late 2013 stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position.

Ocena
5 / 5
Polubienia
14
Pobrania
76
Wydruki
0
Wyświetlenia
627
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position.

To protect the macbook's surface from scratches I glued 6 felt protectors into the appropriate positions. The protectors I used were about 10mm in diameter and 3mm in height.

The original CAD was created in onshape. With your own account you can import and modify, without account you can export numerous different CAD formats (sorry no OpenSCAD for this quick design).

Print instructions

The first print without support failed due to bad bed adhesion. I reprinted with supports but found that my first layer calibration was off. The maximum overhang is 60°, so it should be possible to print without supports (may need brims though).

Recommendation:

  • 3 perimeters
  • 25% gyroid infill
  • print with variable layer height (.2mm base layer height)
  • use supports

Tagi